MUTOH Rockhopper II Series Guide de l'utilisateur Page 136

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 137
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 135
User’s Guide Rockhopper 3 Extreme
CHAPTER 7 : TROUBLESHOOTING
136 AP-75198– Rev. 1.2
Step 3 : Move the carriage close to the capping station. Warning: if you feel obstruction, turn-up the head-
height slide-gear up. The carriage is probably obstructed by the pressure rollers.
Step 4 : When the carriage is above the capping-station, turn back the head-height slide-gear. Make sure
the arrow is in the DOWN-position
Step 5 : Move the carriage to the utter most right position. Make sure the slide gear is not blocking.
Step 6 : To protect the print heads, turn the small brass gear counter clockwise. The capping station will
suddenly move upwards. Just continue to turn until you cannot go further.
Step 7 : Verify if the carriage is properly capped. Try to move the carriage. If it is properly capped, it should
not be possible. Now your machine is temporarily protected until the technical issue is resolved!
Vue de la page 135
1 2 ... 131 132 133 134 135 136 137

Commentaires sur ces manuels

Pas de commentaire