MUTOH Rockhopper II Series Guide de l'utilisateur Page 27
- Page / 137
- Table des matières
- DEPANNAGE
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
User’s Guide Rockhopper 3 Extreme
CHAPTER 3 : BASICS
27 AP-75198– Rev. 1.2
Step 6 : Make the correct settings and press the [F4]-key to start the media initialization.
Step 7 : If everything is done correctly, the following screen should appear.
Notes
If there are any problems during the initial start-up operation, the printer will display a message
on the operation panel, and the operation may stop. If the operation stops, refer to
"Troubleshooting", and take the appropriate actions.
Step 8 : Before start printing, be sure to perform a nozzle check to ensure all nozzles are present. If not,
perform the necessary cleaning cycles.
3.2 POWERING OFF CYCLE
Power OFF the printer according to the procedure below:
Notes
Please be sure to perform the necessary maintenance before powering OFF the machine. All
details can be found in chapter 4.
Step 1 : Verify the following regarding the operational condition of the printer:
There is no printing operation being performed.
The operation panel is in the main screen.
Step 2 : Press the [POWER] key of the operation panel to switch OFF the printer.
Step 3 : [Power OFF] will be displayed for a few seconds
Following message is displayed on the operation panel.
All lamps and the LCD of the operation panel will switch OFF.
The printer will automatically perform a TubingFlush and power OFF.
- User’s Guide 1
- 2 AP-75198– Rev. 1.2 2
- COPYRIGHT NOTICE 3
- 4 AP-75198– Rev. 1.2 4
- 5 AP-75198– Rev. 1.2 5
- 6 AP-75198– Rev. 1.2 6
- 1 SAFETY INSTRUCTIONS 7
- 1.1 REGULATIONS 8
- 1.2 MANAGING VOC’S 9
- 1.3 HANDLING INKS AND WASTE 9
- 1.5 SAFETY INSTRUCTIONS 10
- 11 AP-75198– Rev. 1.2 11
- 1.6 WARNING LABELS 12
- 13 AP-75198– Rev. 1.2 13
- 14 AP-75198– Rev. 1.2 14
- BEFORE SERVICING 15
- 16 AP-75198– Rev. 1.2 16
- 2 PRODUCT OVERVIEW 17
- 2.1 PRINTER 18
- 2.1.2 Rear 19
- 2.2 OPERATION PANEL 20
- CHAPTER 2 : PRODUCT OVERVIEW 21
- 21 AP-75198– Rev. 1.2 21
- 2.3 HEATER SYSTEM 22
- 2.4 INSTALLATION ENVIRONMENT 23
- 2.4.2 Working space 24
- 3 BASICS 25
- 3.1 POWERING ON CYCLE 26
- 3.2 POWERING OFF CYCLE 27
- 3.3 LOADING MEDIA 28
- CHAPTER 3 : BASICS 29
- 29 AP-75198– Rev. 1.2 29
- 3.4 REPLACING INK CASSETTES 30
- 3.4.2 Types 31
- 3.4.3 Replacement procedure 31
- 3.5 REPLACING CUTTING BLADE 32
- 3.6.1 Replacement Time 33
- 3.6.2 Replacement Procedures 33
- 34 AP-75198– Rev. 1.2 34
- 35 AP-75198– Rev. 1.2 35
- 36 AP-75198– Rev. 1.2 36
- 4 PERIODICAL MAINTENANCE 37
- 4.1 DONE BY END USER 38
- 4.1.1 Weekly Maintenance 39
- 40 AP-75198– Rev. 1.2 40
- 41 AP-75198– Rev. 1.2 41
- 4.1.3 Monthly maintenance 42
- 1 = Sponge (KY-42889) 43
- 2 = Tweezers 43
- 3 = Gloves 43
- 1 = Two holes 43
- 2 = Pin of black box 43
- 44 AP-75198– Rev. 1.2 44
- 4.1.5 Cleaning 45
- 46 AP-75198– Rev. 1.2 46
- 47 AP-75198– Rev. 1.2 47
- 48 AP-75198– Rev. 1.2 48
- 49 AP-75198– Rev. 1.2 49
- 50 AP-75198– Rev. 1.2 50
- 51 AP-75198– Rev. 1.2 51
- 5.1 USING MEDIA 52
- 53 AP-75198– Rev. 1.2 53
- 5.1.4 The printing area 54
- 5.2 TESTPRINTING 55
- 5.2.1 Setup List 56
- 5.2.2 NozzleCheck 57
- 5.2.3 Alignment 58
- 5.2.4 Colour palette 59
- 5.2.5 Maintenance record 60
- 5.3.1 Basics about the step 61
- 62 AP-75198– Rev. 1.2 62
- 63 AP-75198– Rev. 1.2 63
- 5.4 i² TECHNOLOGY 64
- 65 AP-75198– Rev. 1.2 65
- 5.5 PRINTING FLOW 66
- 6 PRINTER MENU 67
- 68 AP-75198– Rev. 1.2 68
- 69 AP-75198– Rev. 1.2 69
- 6.1 HOW TO WORK IN THE MENU 70
- 71 AP-75198– Rev. 1.2 71
- 72 AP-75198– Rev. 1.2 72
- 73 AP-75198– Rev. 1.2 73
- 74 AP-75198– Rev. 1.2 74
- 75 AP-75198– Rev. 1.2 75
- 6.3.2 When heaters are ready 76
- 77 AP-75198– Rev. 1.2 77
- 78 AP-75198– Rev. 1.2 78
- 79 AP-75198– Rev. 1.2 79
- 6.4.2 Manually cut off media 80
- 6.5 MENU OVERVIEW (1/7 – 7/7) 81
- 6.5.1 Setup Menu 1/7 82
- 83 AP-75198– Rev. 1.2 83
- 84 AP-75198– Rev. 1.2 84
- 85 AP-75198– Rev. 1.2 85
- 86 AP-75198– Rev. 1.2 86
- 87 AP-75198– Rev. 1.2 87
- 88 AP-75198– Rev. 1.2 88
- 89 AP-75198– Rev. 1.2 89
- 90 AP-75198– Rev. 1.2 90
- 91 AP-75198– Rev. 1.2 91
- 92 AP-75198– Rev. 1.2 92
- 6.5.2 Setup Menu 2/7 93
- 94 AP-75198– Rev. 1.2 94
- 95 AP-75198– Rev. 1.2 95
- 96 AP-75198– Rev. 1.2 96
- 97 AP-75198– Rev. 1.2 97
- 98 AP-75198– Rev. 1.2 98
- 99 AP-75198– Rev. 1.2 99
- CHAPTER 6 : PRINTER MENU 100
- 100 AP-75198– Rev. 1.2 100
- 101 AP-75198– Rev. 1.2 101
- 6.5.3 Setup Menu 3/7 102
- 103 AP-75198– Rev. 1.2 103
- 104 AP-75198– Rev. 1.2 104
- 6.5.4 Setup Menu 4/7 105
- 106 AP-75198– Rev. 1.2 106
- 107 AP-75198– Rev. 1.2 107
- 108 AP-75198– Rev. 1.2 108
- 109 AP-75198– Rev. 1.2 109
- 110 AP-75198– Rev. 1.2 110
- 111 AP-75198– Rev. 1.2 111
- 112 AP-75198– Rev. 1.2 112
- 113 AP-75198– Rev. 1.2 113
- 114 AP-75198– Rev. 1.2 114
- 6.5.5 Setup Menu 5/7 115
- 116 AP-75198– Rev. 1.2 116
- 117 AP-75198– Rev. 1.2 117
- 118 AP-75198– Rev. 1.2 118
- 6.5.6 Setup Menu 6/7 119
- 120 AP-75198– Rev. 1.2 120
- 6.5.7 Setup Menu 7/7 121
- 7 TROUBLESHOOTING 122
- 7.1 INTRODUCTION 123
- CHAPTER 7 : TROUBLESHOOTING 124
- 124 AP-75198– Rev. 1.2 124
- 125 AP-75198– Rev. 1.2 125
- 126 AP-75198– Rev. 1.2 126
- 127 AP-75198– Rev. 1.2 127
- 128 AP-75198– Rev. 1.2 128
- 7.3 ERROR MESSAGES 129
- 130 AP-75198– Rev. 1.2 130
- 131 AP-75198– Rev. 1.2 131
- 132 AP-75198– Rev. 1.2 132
- 133 AP-75198– Rev. 1.2 133
- 7.4 WHEN MEDIA JAMS OCCUR 134
- 135 AP-75198– Rev. 1.2 135
- 136 AP-75198– Rev. 1.2 136
Produits connexes et manuels pour Imprimer et scanner MUTOH Rockhopper II Series
(84 pages)
(66 pages)© 2020, manymanuals.fr. Tous droits réservés | 0.110 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels