MUTOH Rockhopper II Series Spécifications télécharger pdf (Page 109)

Rockhopper II series printers – Maintenance Manual

110

AP-74065, Rev. 1.2, 27/09/04

4.7.9.3. B. Replacing the cursor roller assembly (6 high-load bearings) : open bearing type

Step 1 : Follow the instructions in "Replacing the CR cursor assembly " to remove the CR cursor

assembly.

Step 2 : Remove the side cursor roller assemblies and B cursor axises together with flat-head driver or

another tool.

1 = CR cursor assembly 2 = B cursor axis

Step 3 : Remove the E ring fixing the cursor roller assembly (MY-43272) of downside.

1 = CR cursor assembly 2 = E ring fixing the cursor roller assembly.

Step 4 : Replace the cursor roller assembly.

Step 5 : Install the spacers and the other parts as shown in the following figure.

1 = E ring fixing the side cursor roller assy 2 = Spacer of the side cursor roller assy

3 = High-load bearing of the side cursor roller assy 4 = Spacer of the side cursor roller assy

5 = Brass spacer of the side cursor roller assy 6 = E ring of the cursor roller assy

7 = Spacer of the cursor roller assy 8 = High-load bearing of the cursor roller assy of

downside

9 = Spacer of the cursor roller assy 10 = Brass spacer of the cursor roller assy

1 2 ... 104 105 106 107 108 109 110 111 112 113 114 ... 318 319

Pas de commentaire

MUTOH Rockhopper II Series Spécifications Page 109