MUTOH Rockhopper II Series Spécifications télécharger pdf (Page 93)

100

101

Rockhopper II series printers – Maintenance Manual

AP-74065, Rev. 1.2, 27/09/04

Step 5 : Completely remove tube bundles 1 and 2.

1 = Tube bundle 2 = Tube bundle 2

Step 6 : Remove the 4 screws fixing the tube clamp.

Step 7 : Remove the tube clamp.

Step 8 : Remove the coupling screws, O-ring and ink tube from the coupling.

Step 9 : Replace the ink tube.

Step 10 : Remove the 2 screws fixing the cable clamp.

Step 11 : Replace the steel bearing.

Step 12 : Replace the tube guide.

Step 13 : Remove the pipe clamp.

Step 14 : Replace the CR tape power cable.

1 = Tube push plate 2 = Cable clamp

2 = Pipe clamp 3 = Coupling, O-ring, coupling screws

4 = Screws fixing tube push plate (M3x8) 4 = Screws fixing tube cramp (M3x20)

Step 15 : Reinstall all parts in the opposite order of the removal procedure.

Notes :

¾ The CR tape power cables must be bundled during installation so that they can not

move.

¾ The edge of the tube push plate must be upside when installed.

¾ You should soak the O-ring in cleaning liquid once gain before installing it.

1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 318 319

Commentaires sur ces manuels

Pas de commentaire

MUTOH Rockhopper II Series Spécifications Page 93

Commentaires sur ces manuels

Produits connexes et manuels pour Imprimer et scanner MUTOH Rockhopper II Series